INTRODUCTION:

ROTARY HANDLE ACCESSORY FOR THE MERLIN GERIN RANGE OF MCCB's
.

From 12,000 feet underground in the Tao Tona Gold Mine to 12,500 feet above in the Mountain Kingdom of Lesotho, the Rain Forsts of Brazil, the deserts of the Middle-East Oil Fields, our Rotary Handles have been switching MCCB’s for over 35 years!

In use in over 400,000 installations, DAROS is the most Versatile Rotary Operating System for MCCB’s in the world.

In response to requests from the worlds market, Schneider Electric has created a new extended rotary handle range for the Compact NS100/250 and the NS400/630 frame sizes, utilising the familiar Daros shaft and handle design. This solution combines local adaptability while still maintaining international quality standards, in line with our customer satisfaction philosophy.

DAROS is a Robust, Door Mounted Extended Rotary Handle system.

It is suitable for use on all NEMA rated enclosures with the exception of NEMA 6.

Description
The Rotary Handle meets with the following International External Protection Specifications:
IP 65 : Degree of protection in accordance with IEC 60529

IK 08 : Protection Index against mechanical shock to IEC 62262

NFPA 79: Installation conformance in respect of External Rotary Handle & padlock facility (National Fire Protection Agency)

Features
 
CLOCKWISE to ON rotation.
 
Padlock facility in OFF position for three padlocks with Maximum 8mm & Minimum 6mm diameter shank. The further use of a B&N Safety Lock Out Caliper which facilitates 6 padlocks with max 8mm shank diameter can further enhance operational safety of equipment.
(Order Code: Series 0009C)
 
Mechanical inter-lock defeat (door open) in ON position.
 
Full inter-lock in OFF and LOCKED position.
 
Supplied with 29cms long drive shaft.
 
All moving components & fasteners are electro galvanised & passivated, utilizing the ENVIROPASS process to impart a trivalent, Hexachrome free passivation film, which conforms to internationally recognized standards, including RoHS directives.
 
Technical Data & Specifications regarding the Advanced Polyester coatings are available on request.
 
Semi reflective housing decal for low-light areas.

Certification
All B&N Products are manufactured under controlled environmental management standards.



Danger
Hazardous Voltage.
Will cause severe injury or death.
Turn power OFF supplying
device before installing

Important!
Please note that only this Schneider Electric branded solution combined with the Daros shaft and handle design is guaranteed with the use of the Merlin Gerin circuit breaker range. Please ensure that you are purchasing genuine Schneider Electric products.

Specifications
The degrees & protection levels of DAROS when installed with the supplied Door Gasket are sumarised as follows:

IP 65 : Defined as a Total Protection against dust ingress, Water jets from any hosed direction and protected against access with wire.

IK 08 : Defined as the protection index against a shock energy of 6J or to classification AG3
(IEC 62 262).

NFPA 79: Defined in the standard section 5.3.3.1 & 6.2.3.1.2


This product is distributed World Wide by:

Schneider Electric South Africa (Pty) Ltd
1 Riverview Park,
Janadel Avenue,
Midrand

Private Bag X139,
Halfway House,
1685

Tel: +27 11 254 6400
Fax: +27 11 254 6529



THE DAROS RANGE FOR MERLIN GERIN COMPACT NS RANGE
In addition to current extended rotary handles available under part numbers 29338 (NS100/250) and 32598 (NS400/630) the following range are available:
MCCB Frame
DAROS Handle Part Number
Shaft Length
Compact NS100/250
MG1250
290 mm
Compact NS400/630
MG4630
290 mm


Search Barker & Nelson
_____________________________

Related Downloads
_____________________________


© 2007 Barker & Nelson (Pty) Ltd. All Rights Reserved.