ROTARY HANDLE Accessory for The SIEMENS SENTRON / SIRIUS-3R Range Of MCCB' s

INTRODUCTION

From 12, 400 feet below sea level in the Tao Tona Gold Mine to 12, 500 feet above in the Mountain Kingdom of Lesotho, the Rain Forests of Brazil, the unforgiving desert of the Middle-East Oil Fields, B&N’s Rotary Handles have been switching MCCB’s for over 35 years!

In use in over 400,000 installations, DAROS is the most Versatile Rotary Operating System for MCCB’s in the world.

In response to requests from the worlds market, Barker & Nelson has created a new extended Rotary Handle range for the entire SIEMENS range of MCCB's.

This solution combines local adaptability while still maintaining international quality standards, in line with our customer satisfaction philosophy.

DESCRIPTION
DAROS is a Robust, Door Mounted Extended Rotary Handle system.

It is suitable for use on all NEMA rated enclosures with the exception of NEMA 6.

The Rotary Handle meets with the following International External Protection Specifications:
IP 65: Degree of protection in accordance with IEC 60529
IK 08: Protection Index against mechanical shock to IEC 62262
NFPA 79: Installation conformance in respect of External Rotary Handle & padlock facility (National Fire ProtectionAgency).

FEATURES

 
CLOCKWISE to ON rotation.
 
Padlock facility in OFF position for three padlocks with Maximum 8mm & Minimum 6mm diameter shank. The further use of a B&N Safety Lock Out Caliper which facilitates 6 padlocks with max 8mm shank diameter can further enhance operational safety of equipment.
(Order Code: Series 0009C)
 
Mechanical inter-lock defeat (door open) in ON position.
 
Full inter-lock in OFF and LOCKED position.
 
Supplied with 29cms long drive shaft.
 
All moving components & fasteners are electro galvanised & passivated, utilizing the ENVIROPASS process to impart a trivalent, Hexachrome free passivation film, which conforms to internationally recognized standards, including RoHS directives.
 
Technical Data & Specifications regarding the Advanced Polyester coatings are available on request.
 
Semi reflective housing decal for low-light areas.


CERTIFICATION
All B&N Products are manufactured under controlled environmental management standards.




Danger
Hazardous Voltage.
Will cause severe injury or death.
Turn power OFF supplying device before installing

Important!
The manufacturers of DAROS are not liable for any injury, damage or loss of any nature due to the incorrect installation of
or misapplication of Accessory. Out-of- factory modification may result in the invalidity of guarantees which may apply.

Specifications
The degrees & protection levels of DAROS when installed with the supplied Door Gasket are sumarised as follows:

IP 65 : Defined as a Total Protection against dust ingress, Water jets from any hosed direction and protected against access with wire.

IK 08 : Defined as the protection index against a shock energy of 6J or to classification AG3
(IEC 62 262).

NFPA 79: Defined in the standard section 5.3.3.1 & 6.2.3.1.2

A Genuine B&N Circuit Breaker Accessory.

Barker & Nelson (Pty) Ltd.
39 Golden Drive,
Bluegum Creek,
Benoni,
Gauteng,
South Africa.
Tel : +27.11.425.2525
Fax : +27.11.425.2071
E-mail: barnel@global.co.za
Web : www.barkernelson.com
Product support: 0800123455


THE DAROS RANGE
SIEMENS MCCB'S
DAROS Range
SENTRON
VL 160X
120SIE.VL160X
VL 160 & VL 250
120SIE.VL250
VL 400
121SIE.VL400
VL 630 & VL 800
121SIE.VL630
SIRIUS-3R
SIRIUS-3R:S0
120SIE.7051
SIRIUS-3R:S2
120SIE.7151
SIRIUS-3R:S3
120SIE.7251


Search Barker & Nelson
_____________________________

© 2005 Barker & Nelson (Pty) Ltd. All Rights Reserved.